Assigning Categories to a Saved Location
You can add custom categories to organise your saved locations.
NOTE: categories appear in the saved locations menu after you have saved more than 12 locations.
1 Select Where To? > Favourites.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
5 Enter one or more category names, separate by commas.
6 If necessary, select a suggested category.
7 Select Done.
Deleting a favourite location
NOTE: deleted locations cannot be recovered.
1 Select Where To? > Favourites.
2 Select > Delete.
3 Select the box next to the favourite locations to delete and select Delete > Yes.
Navigating to your destination
Routes
A route is a path from your current location to one or more destinations.
• The device calculates a recommended route to your destination based on the preferences you set, including
the route calculation mode (
Changing the route calculation mode, page 26
).
• The device can automatically avoid roads that are not appropriate for the active vehicle profile.
• You can start navigating to your destination quickly using the recommended route, or you can select an
alternative route (
).
• If there are specific roads you need to use or avoid, you can customise the route (
).
• You can add multiple destinations to a route (
Adding a location to your route, page 25
).
Starting a route
1 Select Where To?, and search for a location (
Finding and saving locations, page 12
).
2 Select a location.
3 Select an option:
• To start navigating using the recommended route, select Go!.
• To choose an alternative route, select , and select a route.
Alternative routes appear to the right of the map.
• To edit the course of the route, select > Edit Route, and add shaping points to the route (
).
The device calculates a route to the location and guides you using voice prompts and information on the map
(
Your route on the map, page 22
). A preview of the major roads in your route appears at the edge of the map for
several seconds.
If you need to stop at additional destinations, you can add the locations to your route (
).
20
Navigating to your destination
