Garmin DESCENT MK3 Series Owner'S Manual Download Page 61 | Manualshive

Page: 61 / 196

background image

Golf Menu

During a round, you can press START to access additional features in the golf menu.
End Round: Ends the current round.
Change Hole: Allows you to manually change the hole.
Change Green: Allows you to change the green when more than one green is available for a hole.
View Green: Allows you to move the pin location to get a more precise distance measurement (

Moving the Flag,

).

Virtual Caddie: Requests a club recommendation from the virtual caddie (

Virtual Caddie, page 52

).

PlaysLike: Shows the PlaysLike factors for the hole (

PlaysLike Distance Icons, page 52

).

Measure Shot: Shows the distance of your previous shot recorded with the Garmin AutoShot

™

feature (

Measured Shots, page 53

). You can also manually record a shot (

Manually Measuring a Shot, page 53

).

Scorecard: Opens the scorecard for the round (

Keeping Score, page 53

).

Odometer: Shows the recorded time, distance, and steps traveled. The odometer automatically starts and stops

when you start or end a round. You can reset the odometer during a round.

Wind: Opens a pointer that shows the wind direction and speed relative to the pin (

Viewing the Wind Speed and

Direction, page 54

).

PinPointer: The PinPointer feature is a compass that points to the pin location when you are unable to see the

green. This feature can help you line up a shot even if you are in the woods or in a deep sand trap.
NOTE: Do not use the PinPointer feature while in a golf cart. Interference from the golf cart can affect the
accuracy of the compass.

Custom Targets: Allows you to save a location, such as an object or obstacle, for the current hole (

Custom Targets, page 55

).

Club Stats: Shows your statistics with each golf club, such as distance and accuracy information. Appears when

you pair Approach

®

CT10 sensors or enable the Club Prompt setting.

Sunrise & Sunset: Shows the sunrise, sunset, and twilight times for the current day.
Settings: Allows you to customize the golf activity settings (

Activities and App Settings, page 61

).

Moving the Flag

You can take a closer look at the green and move the pin location.
1 From the hole information screen, press START.
2 Select View Green.
3 Tap or drag to move the pin location.

TIP: You can press START to zoom in our out.

4 Press BACK.

The distances on the hole information screen are updated to show the new pin location. The pin location is
saved for only the current round.

Activities and Apps

51

«
...
59
60
61
62
63
...
»

Summary of Contents for DESCENT MK3 Series





































































































































































































Reviews:

No comments

Related manuals for DESCENT MK3 Series

Brand: Ratio Computers Pages: 7

Brand: Smart Health Pages: 20

Brand: bob World WAVE Pages: 16

Brand: Casio Pages: 12

Brand: Casio Pages: 3

Brand: Longines Pages: 16

Brand: Caldwell Pages: 8

Brand: Soleus Air Pages: 12

ST-5000 DIGITAL COMPASS

Brand: Victorinox Pages: 1

Brand: Muhle Pages: 26

Brand: Ball Pages: 204

Brand: Certina Pages: 4

Brand: TAG Heuer Pages: 32

Brand: Timberland Pages: 19

Brand: Suunto Pages: 86

Brand: Suunto Pages: 93

Brand: Suunto Pages: 58

Brand: Suunto Pages: 380

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands