Garmin DESCENT MK3 Series Owner'S Manual Download Page 126 | Manualshive

Page: 126 / 196

background image

Compass Settings

Hold MENU, and select Sensors & Accessories > Compass.
Calibrate: Allows you to manually calibrate the compass sensor (

Calibrating the Compass Manually, page 116

).

Display: Sets the directional heading on the compass to letters, degrees, or milliradians.
North Ref.: Sets the north reference of the compass (

Setting the North Reference, page 116

).

Mode: Sets the compass to use electronic-sensor data only (On), a combination of GPS and electronic-sensor

data when moving (Auto), or GPS data only (Off).

Calibrating the Compass Manually

NOTICE

Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that
influence magnetic fields, such as vehicles, buildings, and overhead power lines.

Your watch was already calibrated at the factory, and the watch uses automatic calibration by default. If you
experience irregular compass behavior, for example, after moving long distances or after extreme temperature
changes, you can manually calibrate the compass.
1 Hold MENU.
2 Select Sensors & Accessories > Compass > Calibrate.
3 Select an option:

• To perform a calibration that rotates the watch through all orientations, select Full Calibration.
• To perform a short calibration that rotates the watch in a figure eight motion, select Quick Calibration >

Start.
NOTE: The Full Calibration option provides better accuracy for diving. The Quick Calibration option is
suitable for other activities.

4 Follow the on-screen instructions.

Setting the North Reference

You can set the directional reference used in calculating heading information.
1 Hold MENU.
2 Select Sensors & Accessories > Compass > North Ref..
3 Select an option:

• To set geographic north as the heading reference, select True.
• To set the magnetic declination for your location automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select Grid.
• To set the magnetic variation value manually, select User > Mag. Variation, enter the magnetic variation,

and select Done.

Altimeter and Barometer

The watch contains an internal altimeter and barometer. The watch collects elevation and pressure data
continuously, even in low-power mode. The altimeter displays your approximate elevation based on pressure
changes. The barometer displays environmental pressure data based on the fixed elevation where the altimeter
was most recently calibrated (

Altimeter Settings, page 117

).

116

Sensors and Accessories

«
...
124
125
126
127
128
...
»

Summary of Contents for DESCENT MK3 Series





































































































































































































Reviews:

No comments

Related manuals for DESCENT MK3 Series

Brand: Omega Pages: 10

Brand: Omega Pages: 48

Brand: ZIIIRO Pages: 48

Brand: Safekid Pages: 11

Brand: Casio Pages: 1

Brand: Solus Pages: 2

Brand: UMAX Technologies Pages: 34

Brand: UMIDIGI Pages: 58

Oyster Perpetual Submariner

Brand: Rolex Pages: 26

PORTOFINO AUTOMATIC

Brand: IWC Schaffhausen Pages: 69

PORTOFINO HAND-WOUND MOON PHASE

Brand: IWC Schaffhausen Pages: 82

Brand: IWC Schaffhausen Pages: 94

Brand: HOLZKERN Pages: 2

Brand: Virmee Pages: 27

Brand: Girard-Perregaux Pages: 12

Brand: Accurist Pages: 2

Brand: TAG Heuer Pages: 5

Brand: Garmin Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands