Garmin Colorado Series, Owner'S Manual

Page: 12 / 26

Colorado Series Owner’s Manual
G
ettinG
S
tarted
Connecting Your Colorado to a
Computer
You can connect your Colorado to your computer using
the PC/USB connector cable.
NOTE: Install the supplied MapSource Trip &
Waypoint Manager software on your computer
before connecting the USB cable to the computer.
Follow the instructions for installation and
operation provided with the software.
To connect your Colorado to your
computer:
1. Lift the USB port protective cover on the top of
the Colorado and insert the smaller connector on
the USB cable into the USB mini-B jack.
2. Connect the remaining cable end to your
computer's USB port.
Information about USB Drivers
The USB drivers are automatically installed when you
install the MapSource Trip and Waypoint Manager
software that came with your Colorado. When you
initially connect the Colorado to a USB port, your
computer might prompt you to locate the destination
of the drivers for the device. You only need to install
the drivers once. After the drivers are installed, your
computer always detects your Colorado when it is
connected. USB drivers might be updated periodically.
You can find updates at www.garmin.com .
External GPS
antenna connector
USB mini-B jack