190-00709-05 Rev. D
Garmin G1000 Pilot’s Guide for the Socata TBM 850/900
323
FLIGHT MANAGEMENT
23)
After crossing FALUR the next waypoint is the FAF. The flight phase changes to LPV on the HSI indicating the
current phase of flight is in Approach Mode and the approach service level is LPV. CDI scaling changes accordingly
and is used much like a localizer when flying an ILS approach. The RVSI is no longer displayed and the VDI
changes to the Glidepath Indicator (as shown in Figure 5-150) when the final approach course becomes active.
Figure 5-150 Descending to the FAF
The descent continues through the FAF (CEGIX) using the Glidepath Indicator, as one would use a glideslope
indicator, to obtain an altitude “AT” 7,800 feet at the FAF. Note the altitude restriction lines over and under (At)
the altitude in the ‘ALT’ field in Figure 5-150.
