BC30
TM
11
• The curb, driveway, or parking stall
lines should be clearly visible on the
device.
2
From the main menu, select
Settings >
Backup Camera.
3
Select the camera to adjust, and select
Guidance Lines > Adjust Guidance
Lines.
4
Use the arrows in the corners of the
screen to move the guidance lines to
match the angle and position of the
curb, driveway, or parking stall lines.
• The guidance lines should appear di-
rectly on top of your reference points.
5
Use the arrows in the center of the
screen to move the guidance lines up or
down. The red section of the guidance
lines should be aligned with the rear of
your vehicle.
6
If necessary, reposition the vehicle
with the other side closely aligned to
a curb, driveway, or parking stall lines,
and repeat the alignment process. You
should attempt to keep the guidance
lines symmetrical, even if your vehicle
is not in perfect alignment with the curb,
driveway, or parking stall lines.
7
Select after alignment is complete.
Showing or Hiding Guidance Lines
1
From the camera view, select
>
Guidance Lines.
2
Select or clear the
Show Guidance
Lines
check box.
Restoring Alignment
You can reset the guidance lines to their
default alignment.
1
Select
Settings > Backup Camera.
2
Select the camera to adjust, and select
Guidance Lines > Restore.
Appendix
Specifications
Camera and
transmitter input
voltage
From 9 to 28 Vdc
Transmitter fuse
Transmitter fuse
500 mA, fast-blow
Camera and
transmitter current
usage
150 mA at 12 Vdc
Camera and trans-
mitter waterproof
rating
IPX7*
Camera view angle 170 degree (Diag-
onal)
Camera Minimum
illumination
1 lux
Camera tempera-
ture range
From -40° to 85°C
(from -40° to 185°F)
