Adding a Dog Using the Track and Control Codes
NOTE: This feature varies based on dog collar device type and feature availability in your area.
Before you can add a dog using the track and control codes, the dog owner must find the track and control
codes (
Finding the Dog ID and Track and Control Codes, page 8
) and tell them to you.
You can use track and control codes to authorize a handheld device to interact with your dog collar device. If
you are not near the dog you want to add or you cannot put the collar into pairing mode, you can add the dog
using the track and control codes.
1 On the handheld device, press the menu button.
2 Select Add Device > Dog > Enter Share Code.
3 Enter the track or control code for the collar, and select Done.
The dog’s track code allows you to track the dog. The dog’s control code allows you to both track and train
the dog.
4 Enter the name of the dog, and select Done.
Finding the Dog ID and Track and Control Codes
You can share a dog’s track code, which enables another person to track your dog. You can also share a dog’s
control code, which enables another person to track and train your dog.
1 Select a dog or select Device Options.
2 Select Share.
The track code and the control code are displayed under the dog's name.
VHF Radio Information
This product may be used only on specific radio frequencies, which vary depending on the country of use. See
the product packaging or go to
for details about the radio frequency of this
product.
Editing Dog Information
1 From the tracking screen, select the dog you want to edit or select Device Options.
2 Select Edit.
3 Select an option:
• Select Collar Light to change the collar light mode.
• Select ID to change the dog collar device ID.
• Select Update Rate to change how often position data is transmitted from the dog collar device.
• Select Update Share Code to change the dog collar device share code.
• Select Dog Type to set which alerts are sent from the dog collar device.
• Select Battery Saver to turn battery saver mode on or off.
NOTE: This automatically switches to a 2 minute update rate when the collar has 25% battery remaining.
• Select Color to set the color used to identify the dog on external devices.
• Select Collar Sleep Mode to turn collar sleep mode on or off.
NOTE: When connected with the handheld device, the dog collar device can be put into sleep mode to
conserve the battery when you are not actively tracking your dog.
• Select Name to edit the name of the dog.
• Select Remove to remove the dog from your device.
8
Dog Collar Device Setup
