Introduction
WARNING
See the Important Safety and Product Information guide in
the product box for product warnings and other important
information.
Not all features are available on all models.
Device Overview
À
Power key
Á
Automatic backlight sensor
Â
microSD
®
memory card slot
Tips and Shortcuts
• Press to turn the chartplotter on.
• Select
Home from any screen to return to the Home
screen.
• Select
Menu to access additional settings about that
screen.
• Select
Menu to close the menu when finished.
• Press to open additional options, such as adjusting
the backlight and locking the touchscreen.
• Press and select
Power Off to turn the chartplotter
off.
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or
scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Adding an Item to Favorites
1
From the home screen, select a category from the right.
2
Hold a button on the left.
The item is added to the Favorites home screen
category.
Accessing Owner's Manuals on the Chartplotter
1
Select
Info > Owner's Manual.
2
Select a manual.
3
Select
Open.
Downloading the Manuals
You can get the latest owner's manual and translations of
manuals from the web.
TIP: To quickly open this web page, scan this code:
2
Download the manual.
Software Update
You may need to update the device software when you
install the device or add an accessory to the device.
Loading the New Software on a Memory Card
1
Insert a memory card into the card slot on the
computer.
2
Go to
www.garmin.com/support/software/marine
.html.
3
Select
Download next to
A03139
Series with SD
Card.
4
Read and agree to the terms.
5
Select
Download.
6
Select
Run.
7
Select the drive associated with the memory card, and
select
Next > Finish.
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software
onto a memory card.
1
Turn on the chartplotter, and wait for the home screen
to appear.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card
is inserted.
2
Open the memory card door
À
.
3
Insert the memory card
Á
, and press it in until it clicks.
4
Close the door.
5
Follow the on-screen instructions.
6
Wait several minutes while the software update
process completes.
The device returns to normal operation after the
software update process is complete.
7
Remove the memory card.
NOTE: If the memory card is removed before the
device restarts fully, the software update is not
complete.
Basic Operation
Marking Your Present Location as a Waypoint
From any screen, select
Mark.
Creating a Waypoint on the Sonar Screen
1
From a sonar view, drag the screen or select .
2
Select a location.
3
Select
New Wpt or .
2
Quick Start Manual
