4
Indicate a new location for the waypoint:
• To move the waypoint while using the chart, select
Use
Chart
, select a new location on the chart, and select
Move Waypoint
.
• To move the waypoint using coordinates, select
Enter
Coordinates
, and enter the new coordinates.
Browsing for and Navigating to a Saved Waypoint
CAUTION
The Auto Guidance feature is based on electronic chart
information. That data does not ensure obstacle and bottom
clearance. Carefully compare the course to all visual sightings,
and avoid any land, shallow water, or other obstacles that may
be in your path.
When using Go To, a direct course and a corrected course may
pass over land or shallow water. Use visual sightings, and steer
to avoid land, shallow water, and other dangerous objects.
NOTE:
Auto Guidance is available with premium charts, in some
areas.
Before you can navigate to a waypoint, you must create a
waypoint.
1
Select
NAV INFO
>
User Data
>
Waypoints
.
2
Select a waypoint.
3
Select
Navigate To
.
4
Select an option:
• To navigate directly to the location, select
Go To
.
• To create a route to the location, including turns, select
Route To
.
• To use Auto Guidance, select
Auto Guidance
.
5
Review the course indicated by the magenta line.
NOTE:
When using Auto Guidance, a gray segment within
any part of the magenta line indicates that Auto Guidance
cannot calculate part of the Auto Guidance line. This is due to
the settings for minimum safe water depth and minimum safe
obstacle height.
6
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
Deleting a Waypoint or an MOB
1
Select
NAV INFO
>
User Data
>
Waypoints
.
2
Select a waypoint or an MOB.
3
Select
Review
>
Delete
.
Deleting All Waypoints
Select
NAV INFO
>
User Data
>
Clear User Data
>
Waypoints
>
All
.
Setting and Following a Direct Course Using Go To
CAUTION
When using Go To, a direct course and a corrected course may
pass over land or shallow water. Use visual sightings, and steer
to avoid land, shallow water, and other dangerous objects.
You can set and follow a direct course from your current location
to a selected destination.
1
2
Select
Navigate To
>
Go To
.
A magenta line appears. In the center of the magenta line is
a thinner purple line that represents the corrected course
from your current location to the destination. The corrected
course is dynamic, and it moves with your boat when you are
off course.
3
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
4
If you are off course, follow the purple line (corrected course)
to go to your destination, or steer back to the magenta line
(direct course).
Routes
Creating and Navigating a Route from Your Present
Location
You can create and immediately navigate a route on the
Navigation chart or the Fishing chart. This procedure does not
save the route or the waypoint data.
NOTE:
The offshore Fishing chart is available with premium
charts, in some areas.
1
From the Navigation chart or Fishing chart, select a
destination.
2
Select
SELECT
>
Navigate To
>
Route To
.
3
Select the location of the last turn before the destination.
4
Select
SELECT
>
Add Turn
.
5
If necessary, repeat step 3 and 4 to add additional turns,
working backward from the destination to the present location
of your vessel.
The last turn you add should be the first turn you make,
starting from your present location. It should be the turn
closest to your vessel.
6
Select
SELECT
>
Done
.
7
Review the course indicated by the magenta line.
8
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
Creating and Saving a Route
This procedure saves the route and all the waypoints in it. The
starting point can be your present location or another location.
1
Select
NAV INFO
>
User Data
>
Routes
>
New
>
Route
Using Chart
.
2
Select the starting location of the route.
3
Select
SELECT
>
Add Turn
.
4
Select the location of the next turn on the chart.
5
Select
SELECT
>
Add Turn
.
The chartplotter marks the location of the turn with a
waypoint.
6
If necessary, repeat steps 4 and 5 to add more turns.
7
Select
SELECT
>
Done
.
Viewing a List of Routes and Auto Guidance Paths
1
Select
NAV INFO
>
User Data
>
Routes
.
2
If necessary, select
Filter
to see routes only or Auto
Guidance paths only.
Editing a Saved Route
You can change the name of a route or change the turns the
route contains.
1
Select
NAV INFO
>
User Data
>
Routes
.
2
Select a route.
3
Select
Review
>
Edit Route
.
4
Select an option:
• To change the name, select
Name
, and enter the name.
• To select a waypoint from the turn list, select
Edit Turns
>
Use Turn List
, and select a waypoint from the list.
• To select a turn using the chart, select
Edit Turns
>
Use
Chart
, and select a location on the chart.
Browsing for and Navigating a Saved Route
Before you can browse a list of routes and navigate to one of
them, you must create and save at least one route.
12
Navigation with a Chartplotter
Summary of Contents for A03113
Page 1: ...A03113 Owner s Manual...
Page 8: ......
