GARMIN Ltd. or its subsidiaries
c/o Garmin International
1200 E. 151
st
Street, Olathe, KS 66062 USA
AIRPLANE FLIGHT MANUAL SUPPLEMENT
or SUPPLEMENTAL AIRPLANE FLIGHT MANUAL
for a Garmin 400W Series Navigation System
190-00356-03 Rev. B
Page 15 of 16
the unit will be configured to PROMPT the pilot to “Enable the autopilot
approach outputs” in order to prevent the autopilot from entering ROLL
mode without the pilot being aware of the transition.
This installation prompts the pilot and requires the pilot to enable the
A/P outputs just prior to engaging the autopilot in APR mode.
This installation supports a seamless transition from digital (GPSS) to
analog guidance for the autopilot. To capture the vertical guidance, the
pilot may engage the autopilot in APR mode at any time when the GPS
Glide Slope (VDI) becomes valid (displayed without a FLAG).
This installation interfaces to the autopilot in analog mode only. To
capture the vertical guidance, the pilot may engage the autopilot in APR
mode at any time when the GPS Glide Slope (VDI) becomes valid.
The autopilot does not support any vertical capture or tracking in this
installation.
