Garmin 190-00831-02 Installation Instructions Manual Download Page 10

8

Garmin Radome Installation Instructions

WarNING:

 This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. 

This Notice is provided in accordance with California’s Proposition 65. See 

www.garmin.com/prop65

 for more information.

WarNING:

 Do not cut the fuse holder from the red wire. The fuse holder must remain in place for the Garmin radome to function correctly. 

Removing the inline 

fuse holder may damage your boat's circuitry.

FCC Compliance

The GMR 18/24 and GMR 18 HD/24 HD comply with Part 80 of the FCC rules. It has received a grant of equipment authorization, issued under 

the authority of the FCC.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Compliance

The GMR 18/24 and GMR 18 HD/24 HD radomes comply with Industry Canada Standard RSS-138.

Declaration of Conformity (DoC)

Hereby, Garmin, declares that the GMR 18/24 and GMR 18 HD/24 HD radomes are in compliance with the essential requirements and other 

relevant provisions of Directive 1999/5/EC.
To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: 

www.garmin.com/products/gmr18/

.

Click 

Manuals

, and then select the 

Declaration of Conformity

 link.

Failure to avoid the following potentially hazardous situations could 

result in an accident or collision resulting in death or serious injury.

•  The radar radome transmits electromagnetic energy. Ensure that the radome 

has been installed according to the recommendations given in this guide, 

and that all personnel are clear of the radome before switching to transmit 

mode.

•  When navigating, carefully compare information displayed on the unit 

to all available navigation sources, including information from visual 

sightings, and maps. For safety, always resolve any discrepancies or 

questions before continuing navigation.

•  Use the electronic chart in the unit only to facilitate, not to replace, the use 

of authorized government charts. Official government charts and notices to 

mariners contain all information needed to navigate safely.

•  Use this unit only as a navigational aid. Do not attempt to use the unit for 

any purpose requiring precise measurement of direction, distance, location, 

or topography. 

Warnings

Summary of Contents for 190-00831-02













Reviews: