Field TAP
SFP Field TAP | P1GSFPU_mini | 1.2.50
Introduction
This document describes the front
panel, LED indications, interfaces,
rear panel, rear switch, and
installation procedure for the
P1GSFP_mini. This portable
network TAP series is ideal for
10/100/ and 1000MB copper
network monitoring, 1000M fiber
network monitoring, or copper to
fiber media conversion. The
innovative design allows this TAP to
be easily installed into any copper
or fiber network segment.
The P1GSFP_mini uses the USB
connector for the monitor port. The USB port is the Aggregation of the two Copper ports or the
two SFP ports.
Note: The P1GSFP_mini is not powered by the USB port
Additional Specifications
Dimensions (HxWxD): 1” x 2.6” x 5.1” (25.4mm x 66.04mm x 129.54mm)
Weight: 0.45 lbs (0.204 kg)
Ambient Temperature: 0C to +40C / +32F to +104F
Storage Temperature: -20C to +70C / -4F to +158F
Voltage: 5V Current (nominal): 0.8
Amps Maximum consumption: 4 Watts
Humidity: 0-90% non-condensing
USB3 data rate = 5Gb/s
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
3