manualshive.com logo in svg

Garland P10GMSFE-5, User Manual, Page: 34 / 47

Share
Download
Garland P10GMSFE-5 User Manual Download Page 34

User Guide

XtraTAP | P10GxxFE-X | 4.22.1

3. Select Set to accept the priority value.

4. Select Cancel to disregard.

5. Select Save to save updates.

 

 

 

 

 

 

 

 

 

Enable/Disable Config Map

Config maps may be enabled or disabled as desired. If a config map is enabled, it is in the database and

available for traffic. If a config map is disabled, it is in the database and not available for traffic. If the
config map has a green check, then it is enabled. If the config map has a red dash, then it is disabled.

 

Disable Config Map

1. Select the green check for the config map in the Enable column.

The green check will change to a red dash.

2. Select Save.

 

Enable Config Map

1. Select the red dash for the config map in the Enable column.

The red dash will change to a green check.

2. Select Save.

The red dash will change to a green check.

3. Select Save.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.

34

Summary of Contents for P10GMSFE-5
















































Reviews:

No comments