manualshive.com logo in svg

Garland INT10G12MSFE-5, User Manual, Page: 28 / 33

Share
Download
Garland INT10G12MSFE-5 User Manual Download Page 28

User Guide

XtraTap | INT10G12XXFE-X | 4.22.1

 Config Map Statistics

Config map statistics are displayed in the filter match column for each config map. The number

displayed represents all packets that have passed through the config map.

1. Select Refresh to refresh the config map statistics.

2. Select Clear Counters to clear and refresh the config map statistics.

3. Select the View Counts icon to display individual statistics for ingress ports, filters, egress ports and

load balancing group ports.

4. Select Refresh Counts to refresh the statistics.

5. Select Clear Counts to clear and refresh the statistics.

6. Select the Egress Filter icon to display the statistics.

7. Select Refresh Counts to refresh the statistics.

8. Select Clear Counts to clear and refresh the statistics.

 Delete Config Map

1. Select the Delete in the Delete column for the desired config map(s).

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for INT10G12MSFE-5


































Reviews:

No comments