User Guide
RegenTAP: Dual Breakout | INT10G12XXV2 | 4.22.1
Tap 1
Tap 2
Port 1
Network Port
Port 7
Network Port
Port 2
Network Port
Port 8
Network Port
Port 3
Speed Control and Monitor Port
Port 9
Speed Control and Monitor Port
Port 4
Monitor Port
Port 10
Monitor Port
Port 5
Monitor Port
Port 11
Monitor Port
Port 6
Monitor Port
Port 12
Monitor Port
Installation Procedure
1. Insert the SFPs into the INT10G12XXV2 based on the speed and application per the Media Types
table. Verify the correct SFPs are inserted into port 3 for tap 1 and port 9 for tap 2.
2. Connect power cables to PS1 and PS2 on the rear panel and plug into available power sources.
3. Verify that the PS1 LED and PS2 LED on the front panel are illuminated.
4. Verify that the SYS LED on the front panel is illuminated.
5. Connect the network ports of tap 1 and/or tap 2 to the desired sources.
6. Verify the link LEDs are illuminated indicating link.
7. Verify the activity LEDs are flashing indicating traffic.
8. Connect the monitor ports of tap 1 and/or tap 2 to the desired source.
9. Verify the link LEDs are illuminated indicating link.
10. Verify the activity LEDs are flashing indicating traffic.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
3
