Garland GEISER 271 Q, Instruction Manual, Page: 30 / 100

English
30/100
English
31/100
8. DETECTION AND TROUBLESHOOTING
In case that the problem is not solved after checking this table, please take your machine to the nearest after
sales service. You can check up on these after sales services in www.recaball.com
Problem Cause Solution
Engine does not start
Switch in ¨OFF¨ position Place switch in ¨ON¨ position
Petrol does not reach
carburettor
Check if there is petrol
in the deposit
Check that the petrol admission tube
is not blocked or folded
Carburettor dirty
Take the machine to the after sales
service
Oil level low Check and refill oil if necessary
Faulty spark plug Clean or replace spark plug
Insufficient compression
Take the machine to the after sales
service
Pump does not suction water
Air entry to the pump
Check that the hose does not have
holes through which air can enter.
Check that the racors and joints are
properly fixed and well fixed.
Joints of the racors in a bad state.
Change.
Turbine damaged
Take the machine to the after sales
service.