Garland GAS 409 XE V20, Instruction Manual

Page: 33 / 112

English English
33/112
9. TROUBLE SHOOTING
Depending on the symptoms that you observe, you can probably know the cause of the problem and could even
solve it:
If you cannot solve the problem using this table, take your machine to your service dealer.
To locate your nearest after sales dealer to your house, contact the shop where you bought the machine from.
Troubleshooting Cause Action
The engine does not start
The machine is not connected to
the mains
Plug the machines to the mains.
Damaged cable
Take the machine to the after sales
agent. Never repair the cable with
tape.
The machine is not completely
mounted
Mount the tubes and the catcher.
Damaged switch
Take the machine to the after sales
service
The machine does not blow
The machine lever is in position
0FF
Put the lever on the blowing
position.
Ventilator obstructed.
Remove the tube and clean the
ventilator.
Tubes obstructed Clean the tubes