![background image](http://html1.mh-extra.com/html/garland/edgelens-focus/edgelens-focus_user-manual_3641222027.webp)
USER GUIDE
EdgeLens Focus | INT10G12xxBP
Name
- enter the config map name, 0-16 characters
Description
- enter the config map description, optional, 0-64 characters
Load Balance Groups
- previously created load balance group template(s) are
displayed and may be selected for the egress port. New may
be selected for the egress port and created with the config
map. If a previously created load balance group template is
selected, port(s) may be added or removed from the template if
desired. This will change the original load balance group
template
Filter Templates
- previously created filter template(s) are displayed and may be
selected for the config map. New may be selected for the filter
and created with the config map. If a previously created filter
template is selected, the filter for the config map may be
changed from the template. This will not change the original
filter template. Is is advisable to rename the filter if a template
was originally used so it can be distinguished from the template Clear
Map
- select to remove any changes on a new config map
Save
- select to save changes
Reset
- if editing an existing config map, select reset to reset
changes back to original config map
Ingress Ports -
Add ingress port(s) to the config map by placing the cursor on the desired port above. Press the left mouse button
and hold to select the port. Drag the port into the Ingress panel and release. To remove a port from the Ingress
panel select the RED X. If more than one port is selected the traffic will be aggregated to the egress port(s) or
load balance group.
Garland Technology | 716.242.8500 |
Copyright © 2020 Garland Technology, LLC. All rights reserved.
27