Garland 932 SG, Instruction Manual

Page: 40 / 132

English
40/132
9. TROUBLESHOOTING
Depending on the symptoms that you might observe, you can detect the probable cause and solve the problem:
If the machine does not start, check the engine compression and the spark from the spark plug.
Depending on the symptoms, we attach a table with probable causes and solutions:
Cylinder
compression
normal
Spark plug
works
Probable cause Corrective action
Yes Yes
No petrol in deposit Put petrol in deposit
Petrol filter is dirty Clean the filter
There is water in the petrol mix Replace the petrol
Petrol used is not adequate Change the petrol used
The carburetor is dirty
Take the machine to your
nearest official service agent
Yes No
Switch is in the Off position
Place the switch on the On or
“I” position
Spark plug is dirty Limpie la bujía
The connecting pipe to the spark
plug is not well connected
Connect the pipe correctly
Not enough
compression
Yes
Spark plug is loose Tighten
Piston and segments are worn out
Take your machine to your
nearest official service agent
Cylinder deteriorated
Take your machine to your
nearest official service agent.
Engine does not
turn
Engine burnt out
Take your machine to your
nearest service agent