Garland 1480 TQG, Instruction Manual

Page: 30 / 136

English
30/160
5.2. DETAILED DESCRIPTION OF THE PRODUCT
1. Exit chute
2. Entry chute
3. Trailer coupling
4. SC System: (Switch-off safety system)
5. Muffler
6. Air filter cover
7. Accelerator
8. Petrol deposit stopper
9. Oil deposit stopper
10. On/off switch
11. Tension pulley of the belt
12. Starter handle
13. Petrol cutting key
14. Air lever
15. Toolbox
16. Bag accessories
5. MACHINE DESCRIPTION
5.1. CONDITIONS OF USE
The chipper is only designed to shred pieces of wood with a maximum diameter of 10 cm. It is prohibited
to shred any other material (for example metal, stones, plastics and any other material). If you want to shred
roots, remove the sand, mud or other residues before shredding. Any other use of the shredder not described
here, annuls the warranty responsibility of the manufacturer. Do not use this machine for any other purpose not
intended. The use of this machine for other than the designated operations may result in dangerous situations.
Utilice esta máquina en el exterior, en ambientes secos y temperaturas entre 5ºC y 45ºC.
Remember that the machine operator is responsible for the dangers and accidents caused to other people or
things. The manufacturer shall not be in any case responsible for damages caused by improper or incorrect use
of this machine.
Images and drawings in this manual are approximate and may not correspond with the actual product.
8
4
9
1
13
15
2
7
3
14
11
6
5
10
11
16