GARIA 1st Edition, User Manual

Page: 16 / 104

6
02
SAFETY
2.2.3 Body and chassis
Always visually inspect the chassis and body to make sure that all chassis and body
parts are present, correctly mounted and undamaged before using.
Check that all electrical functions are working correctly. This includes:
• The headlamps, both high and low beam
• The parking light
• The turning signal indicator
• The horn
• The hazard light
• The windshield wiper/washer
2.2.4 Brakes
Always make sure that brakes are functioning correctly. Do not drive, if brakes are not
functioning correctly.
When engaging the brake pedal, the pedal should show resistance after being de-
pressed approximately 1/3 of its way. If it is possible to push the brake to the floor
without any resistance, it is an indication of a malfunction in the braking system.
Please consult a qualified repair shop immediately. It is recommended that repairs are
provided by an Authorized Garia Service Dealer. The pedal should feel firm at all times
and always return to its original position when released.
Always ensure that the ignition switch is turned “OFF” before the pedal operation
is tested. Vehicle can accelerate abruptly if vehicle is set to the “F” or “R” position
and potentially cause severe injury to persons or damage to property. Do not drive if
brakes are not working correctly.
:$51,1*