Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)
36
www GarrettCom com
.
.
Each 6KQ Port Module (PM) is individually described in the following sections.
For the “
6KF
-series” fiber modules in slot C, the operational description is the
same as the corresponding fiber modules configured in slots B and D described below.
5.2.1
6KQ2-MST, 2@100Mb multi-mode FX-ST “twist lock” Combo
Module
The Magnum 6KQ2-MST is two port ST fiber module at 100MB. The module
is equipped with dual-mode
ST-type connectors and
dual speed copper ports.
The ST-connector functions
as a fiber optic transceiver
to support 100BASE-FX
network segments. When
installed in a Magnum 6KQ
Managed Switch, the
copper port supports the standard distance 100m on each port and the fiber port supports
fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically
2km at full-duplex and 412m at half-duplex.
Each port has an Activity (ACT) LED indicating packets being received. A
Link (LK) LED indicates proper connectivity with the remote device when lit, and
FDX/HDX LED to indicate full-duplex mode when lit (half-duplex when off).
5.2.1a 6KQ2-10ST, 2@10Mb multi-mode FX-ST “twist lock” Module
The 6KQ2-10ST is a two port Fiber module that looks similar to the
100MbFiber module with the
exception of 10Mb speed at
the ST fiber module. The ST-
connector functions as a fiber
optic transceiver to support
10BASE-FX network
segments. When installed in a
Magnum 6KQ Managed