5
Instructions for use
Step 3:
Start the device.
Step 4:
Begin cleansing the face from the chin by gently moving the brush over
your ears until you are able to clean your face.
Note: Charging port is covered with silicone material in order to protect the
device from water getting inside. Do not pierce or puncture the protective
layer.
Pressing "+" will increase the vibration level one step up.
Pressing "-" has the opposite effect, which is to reduce the intensity of the
vibration.
Use of the brush:
Loading/Start-up:
2. To turn on the device, press the power button. The LED diode will signal that the
device is turned on.
3. While using the vibration decrease/increase buttons, we can adjust the vibration
intensity according to our own needs.
The high frequency of vibration of the device causes high-frequency shock waves
on the skin which help to remove residues from cosmetics, get rid of dead skin
or act as a relaxing massage.
The suggested working time of the device on each part of the face is about
15 seconds.
Step 1:
Remove makeup then gently wet your face.
Step 2:
Apply the cleanser to the silicone nubs of the brush.
1. Charge the device with the included charging cable by connecting the device
to the mains power supply or the USB port of the computer.
Step 5:
Repeat the activity on the rest of the face until the skin is completely
cleansed. If necessary, add a small amount of cleanser as well.
Step 6:
After finishing the treatment, clean the device thoroughly.
