Assembly Instructions –
Model 75006 Seat Slide Assembly with Swivel
Form 12.112
6. Slip slideplate (B) with attached swivel into grooves of aluminum
tracks as illustrated in fig. 3. Make certain that the open ends of
the slideplate touch the endwalls of the grooves and that plate
has free travel in both directions. When this is achieved, tighten
the four 1/4-20 x 1” machine screws.
7. Secure slide assembly to seat bottom by drilling four
3/16” holes in seat bottom at holes #2 in aluminum tracks (see
fig. 3). Fasten tracks in position by using four screws (K).
8. Slide out slideplate assembly (B) from tracks and then mount it to
boat by drilling the four marked holes from step 1. Secure with
appropriate fasteners best suited for your particular application.
9. Slide seat with mounted tracks onto mounted slideplate as
illustrated in fig. 3. Center slideplate In tracks. Slip s.s. washer
(L) and then polywasher (M) over locking rod (N). Slide rod into
hole of track (G) and thread rod into nut of track (H) (see fig. 3).
10. Periodically lubricate slide, track and swivel for easy operation.
FIG. 3
K
M
J
I
L
N
G
H
#1
#2