TM
GARED
PERFORMANCE
SPORTS SYSTEMS
Gared Holdings, LLC
9200 E. 146th St.
Noblesville, IN 46060
FILE LOC.
SHT. NO.
PART NO.
REV
PORTABLE ROUND SOCCER GOALS
2
OF 14
651752322
A
Q:\Inventor Files\
DATE
12/26/2017
Installation and Assembly Instructions
Table of Contents
Section Page No.
Thank you for your purchase of the SGRDPT Soccer Goal. To ensure that our equipment will provide
years of use to you, we are including this installation, operation, and maintenance guide. This guide
will provide information on the proper assembly and installation methods, operating procedures, and
preventative maintenance of your soccer goal.
Please note that a Bill of Materials is being included with this guide. Please check that all of the
parts called out on the Bill of Materials are present prior to beginning assembly. Please do not
substitute for factory parts. Please contact the PSS or Gared Sports customer service department
and allow them to determine if substitute parts are acceptable.
It is recommended that an individual who has been properly trained perform assembly and set up of
the Soccer Goal. No one under the age of 18 should attempt assembly or set up of the unit, unless
properly supervised.
To prevent normal wear and tear from shortening the life of the unit, preventative maintenance
inspections and repairs should be performed at least once per year. If the units are subject to high
or unusual usage, inspections should be scheduled to occur more frequently. If items are found to
be nonconforming, replacements can be ordered from Gared Sports or one of our authorized dealers.
When contacting PSS or Gared Sports, please have information regarding the dealer/installer who
sold the unit, the name of the project, and any applicable warranty information.
Introduction/Liability Discalimers
Before proceeding with assembly, read all instruction and assembly proceedures. make sure all
parts have been received and are not damaged.
Introduction/Liability Disclamer 2
Parts Checklist 3
Goal Assembly 4-12
Storage 13
Maintenance 14
