GB
NL
DE
FR
11
shown in Fig. 10 before plug into the power socket.
•
Check to ensure the nozzle is not blocked before turning the device on.
•
Set the temperature to setting II.
•
Allow the device about 45 seconds to warm up.
•
To eliminate weeds, hold the nozzle over the weeds for about 5 seconds. During
these 5 seconds the cell structure of the weed is destroyed. As a result, the weed dies
within a few days.
•
It is not necessary to completely burn the weeds, 5 seconds is more than sufficient.
•
For an efficient treatment the nozzle should be held around 0 to 5 cm above the
weeds
•
The effects are not visible immediately but will take a while before they can be seen.
It is more of a long-term effect.
OPTION 2: BBQ LIGHTER/ FIREPLACE CHARCOAL LIGHTER ( included or not)
The BBQ and fireplace lighter is always to be used without the extension handle.
Remove the extension handle by pressing and releasing button (7) and pulling the
extension handle from the device.
Use:
•
Attach the BBQ / fireplace charcoal lighter nozzle (9) onto the device.
•
Select temperature setting II.
•
Place the nozzle under the coal or the wood.
•
Ensure that the device is properly positioned. The kickstand(2) could be used for
firmly support the device in the proper position.
•
Insert the plug into the socket.
•
Check to ensure the nozzle is not blocked before turning the device on.
•
Remove the device from the coals or the wood as soon as it starts to glow.
•
Now blow hot air into the coals or wood from a distance of around 5-10cm, until the
coals or wood is burning properly.
•
Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle
to high temperatures for a prolonged period of time could cause the material to melt.
Please follow these instructions to achieve long-term enjoyment with the product.
Watch Out!
To avoid overheating of the BBQ or Fireplace do not use the device for
longer than necessary.
COOLING:
Before turning off the device, it must be cooled first. Select temperature setting I for at
Summary of Contents for PLD2400
Page 2: ...GB NL DE FR 2 11 4 9 10 3 1 2 Fig B 4 3 1 5 6 7 2 9 8 10 11 12...
Page 15: ...GB NL DE FR 15 11 4 9 10 3 1 2 Fig B 4 3 1 5 6 7 2 9 8 10 11 12...
Page 27: ...GB NL DE FR 27 11 4 9 10 3 1 2 Fig B 4 3 1 5 6 7 2 9 8 10 11 12...
Page 34: ...GB NL DE FR 34 11 4 9 10 3 1 2 Fig B 4 3 1 5 6 7 2 9 8 10 11 12...
