background image

Important Information 

2522-34-46 

Important Information 

1.1 

General Information 

The 

WOB-L

®

 Piston Pumps

 conform to the following directives:

2006 / 42 / EC 

Machinery Directive 

20

1

4 / 

30

 / E

U

Electromagnetic Compatibility Directive 

2014

 / 

68

 / E

U

Pressure Equipment Directive 

2014 / 29 

EU

Simple Pressure Vessels Directive 

The CE sign is located on the rating plate.  
Observe the binding national and local regulations when fitting the pump into installations! 

1.2 

Target Groups 

This Operating Manual is intended for the personnel planning, operating and maintaining 
WOB-L

®

 Piston Pumps.

This group of people includes: 

Designers and fitters of vacuum apparatus 

Employees working on commercial laboratory and industrial vacuum technology applica-
tions 

Service personnel for WOB-L

®

 Piston Pumps

The personnel operating and maintaining the WOB-L

®

 Piston Pumps must have the techni-

cal competence required to perform the work that has to be done. 
The user must authorize the operating personnel to do the work that has to be done. 
The personnel must have read and understood the complete Operating Manual before using 
the WOB-L

®

 Piston Pumps.

The Operating Manual must be kept at the place of use and be available to the personnel 
when required. 

1.3 

Intended Use 

The layout of the WOB-L

®

 Piston Pumps must be appropriate for the conditions of use.

The user bears the sole responsibility for this. 

The WOB-L

®

 Piston Pumps may only be operated under the conditions stated

in the "Technical Data" section,

on the type plate, and

in the technical specification for the order concerned.

WOB-L

®

 Piston Pumps are approved for extracting, pumping and compressing gases and

vapours. If these gases and vapours are toxic or explosive, then the user must observe 
the currently valid safety regulations for this application.  

1.4 

Use for an Unauthorized Purpose 

It is forbidden to use the pump for applications deviating from the technical data stated on 
the type plate or the conditions stated in the supply contract, or to operate it with missing or 
defective protective devices. 

Summary of Contents for Welch WOB-L 2522C-02






















Reviews: