20
|
www.gd-elmorietschle.com
© Gardner Denver Schopfheim GmbH
Fig. 8 Excerpt of connection diagram of control unit
Fig. 9 Connection assignment in the frequency converter
Installation
5.5.1 Electrical connection of the control
The control requires its own 1~ connection. It is connected to the terminal -10X1 in the control box (Fig. 8).
The control unit is internally protected by a fuse (6 A). The user has to install an additional fuse of 10 A trig-
ger current as back-up fuse.
Connection data:
Value
Input voltage
100 - 240 V AC (50/60 Hz)
120 - 370 V DC
Rated current
1.1 A
5.5.2 Electrical connection - central vacuum unit
The power connection is connected to the frequency converter.
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]
