background image

9

www.gd-elmorietschle.com

 © Gardner Denver Schopfheim GmbH

 

|

Safety

2.8  Safety instructions for installation, commissioning and maintenance

•  The user ensures that any installation, commissioning and maintenance work is carried out by authorised, 

qualified specialists who have gained sufficient information by an in-depth study of the operating instruc-
tions

•  Only work on the machine when it stands still and is secured against accidental switching on
•  Strictly observe the procedure for decommissioning the machine described in the operating instructions
•  Fit or start up safety and protective devices again immediately after finishing work. Before recommission-

ing, follow the instructions listed for commissioning

•  Alteration works or modifications to the machine are only permissible with the manufacturer's consent
•  Only use original parts or parts approved by the manufacturer. The use of other parts can void liability for 

any consequences arising.

•  Keep unauthorised people away from the machine

2.9  Guarantee terms

The manufacturer's guarantee will no longer apply in the following cases:
•  Not intended use
•  Nonobservance of these instructions
•  Operation by insufficiently qualified staff
•  Using spare parts that have not been approved by 

Gardner Denver Schopfheim GmbH

 

•  Unauthorised modifications to the machine or the accessories supplied by 

Gardner Denver Schopfheim 

GmbH

 

Summary of Contents for Elmo Rietschle C-VLR 62

































Reviews: