background image

2

1.0 DESCRIPTION

This cable puller is designed to be used together with the
power drive from a portable power threader. The product has
been tested with the Mini-Collins

®

and Rigid™ pipe threader.

Other brands you may already have can also be used.

Each cable puller application will depend upon your particular
need. In this manual we will cover general procedures as they
apply to our equipment.  

Please read and understand this manual before attempting to
use this equipment. Most important is the safety of 
the operator.

2.0 SAFETY SYMBOL DEFINITIONS

The symbol below is used to call your attention to instructions
concerning your personal safety. Watch for these symbols.
They point out important safety precautions. They mean
“ATTENTION! Become alert. Your personal safety is
involved.” 
Read the message that follows and be alert to the
possibility of personal injury or death.

DANGER: Indicates a high probability that death,

severe bodily injury or major property damage could result.

WARNING: Is serious but less inevitable. There is

some probability that death, severe bodily injury or
major property damage could result.

CAUTION: Is less serious but still demands

attention. Indicates a hazard which may result in minor
injury or property damage.

3.0 WARNINGS

This section contains information for your protection,
safety and quick reference. When using an electrical
appliance basic precautions should always be followed,
including the following.

Read all Instructions before using the CP2000.

Always have this manual available for reference at the
job site.

DANGER: Do not allow anyone to operate this

equipment until they have read and understood all
operating and safety instructions.

WARNING: This cable puller is not to be used as a

hoist for lifting, supporting, or transporting people or
loads. Failure to observe these precautions could result
in serious injury.

WARNING: Never stand directly behind the path of a

pulling rope. Keep exposed part of pulling rope as short
as possible. A broken pulling rope can whip with
extreme force.

WARNING: Only operate in well lighted areas.

DANGER: Do not operate in an area that contains

hazardous or combustible material. A fire or explosion
can result.

WARNING: All pulling system components must be

rated to withstand the maximum pull forces.

DANGER: Never stand directly under a vertical pull.

WARNING:  Keep the work area clear of 

all bystanders.

CAUTION: Check all pulling system parts before

use. Never use worn or defective components.

DANGER: Pulling system components can break

during use. Always protect yourself by wearing gloves,
protective glasses and hard hat.

DANGER: Do not allow anyone to operate this

equipment until they have read and understood all
operating and safety instructions.

WARNING: Only use rope that is rated for the

pulling force required. Check the rope often for damage.
Damaged rope can break and cause eye or other 
bodily injury.

DANGER: Electrical equipment must be grounded

while in use to protect the operator from electric shock.

DANGER: Only use extension cords that are rated

and marked for outdoor use.

DANGER: Never use this equipment in rain or 

damp locations. 

DANGER: Disconnect power before service 

or repair.

WARNING: The rope on the capstan can crush your

hand during operation. Do not allow the rope to wrap
around any part of your body. Keep loose clothing,
hands and body away from moving parts. 

WARNING: This cable puller is not to be used as a

hoist for lifting, supporting, or transporting people or
loads. Failure to observe these precautions could result
in serious injury.

WARNING: Keep hands and loose objects away

from moving parts during operation. Serious injury 
may occur.

CAUTION: This unit contains a pin designed to

shear if maximum recommended load is exceeded. This
sudden shearing action may send a shock to the rope,
possibly causing injury. Avoid such hazards by wearing
leather gloves and never wrap the rope around yourself.

Summary of Contents for CP2000









Reviews: