Fitting Extensions to the Xtreme44 & 47
The Xtreme44 & 47 have the option of being used with modular clamped ex-
tension sections or the #10
-
12 triple telescopic extension pack if needed for
high level work.
Standard Extensions
—For use up to 68ft—
4
extensions maximum
#10
-
12 Triple
Telescopic Extension Pack—
1
pack per pole
Hi
-
Strength Extensions
—For use up to 79.5ft—
6
extensions maximum
We do not recommend mixing these extension sections in use on the pole.
Warning—never use the standard extensions on the pole at extended length
above 68ft. It is possible to fit 1x Modular extension section and then add the
triple telescopic extension pack to the base of the this section.
To use just 1 modular extension or the #10
-
12 triple extension pack—these
both add
-
on in much the same way as adding another fully telescopic section
to the pole. Remove the end cap from the base of the pole.
Pull out the gooseneck from the top of the pole and disconnect the pole hose
from the Gooseneck. Then pull the hose out of the pole.
Open the lever on the extension section and slide it on from the base of the
pole. Fully side the section up the pole and close the clamp lever. You will need
to slide the pole hose up from the base of the pole and re
-
connect to the
gooseneck before re
-
attaching the gooseneck.
This first modular extension section
can now be used just like a 10th sec-
tion on the pole. Always ensure that
you allow sufficient overlap on this
section when using. The base handle
section will have a painted band to indicates the maximum safe extension
point.
