GARDEO PRO GPDCBT52, Original Instructions Manual

Page: 84 / 109

2
INTRODUCTION
Thank you for your purchasing the brush cutter of our company. This manual
contains safety information to make you aware of the hazards and risks associated
with themachine and how to avoid them. This machine is intended for trimming and
brushcutting and is not intended for any other purpose. It is important that you read
and understand these instructions thoroughly before attempting to start or operate
this equipment. Save these original instructions for future reference
By the way, due to changes of specifications, all details of your machine may not
agree with this manual. Please understand accordingly.
SPECIFICATIONS
Name Brush cutter
Brushcutter Model GPDCBT52
diameter blade 255 mm / 9000min
-1
spool diameter
260 mm / 8000min
-1
Handle type
A deux mains
Machine weight without
accessories
7.5/7.77Kg
Weight of the machine with
accessories and empty tank
7.87/8.73 Kg
Machine weight with full tank
and accessories
8.73/8.83 Kg
Outward side 1900X460X650mm
Power transmission method Automatic centrifugal clutch spiral gear
Reduction rate 20:15
Blade rotating direction
Counterclockwise (from operator′s view)
Gasoline
Engine
Model PN1E44F
Type Single cylinder air cooling 2-cycle
Displacement 51.7 cm³
Max.Output
1,45 Kw
Max.Torque
2.05 Nm
Fuel tank capacity 1200cm³
Mixing ratio 40:1
Lubricant oil FC2-Stroke engine oil
Carburetor Float piston valve
Sparking method IC-controled fly wheel magnet
Spark plug
RCJ7Y
Starting mehtod Recoil starer
Stopping method Sparking circuit primary short(push button)
*Specifications are subject to change without notice!
Noise emission values measured according to relevant standard.
Acoustic pressure level L
PA
93 dB(A) K = 3dB(A)
Acoustic power level L
WA
114 dB(A) K = 3 dB(A)