8. Insert the four protective guards around the glass tube. Secure in place using the supplied fixing brackets and
3/16” screws. See Figure 8.
9. Attach the three side panels to the unit and secure in place using the supplied 3/16” screws. Please note:
DO NOT cover the front side where you can see the control panel. See Figure 9.
9
ASSEMBLY INSTRUCTIONS
7
7. Carefully install the glass tube by lifting up
and inserting through the center hole in the
upper plate. Ensure the black silicone ring is
attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the
hole of the lower plate cover and onto the
middle plate. Check and ensure that the glass
tube is positioned properly and is completely
covering the center hole of the middle plate.
8. Assembly the protective guard.
Hang the hooks of the protective guard onto
the holes in supports.
Secure the protective guards with fixing
brackets with 4pcs 3/16" screws.
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
WARNING! The black
silicone ring must be in place
prior to operating the heater.
BLACK SILICONE
RING
Hardware Used
8
E
DD
HH
DD
KK
x 4
Philips
screwdriver
3/16” Screw
x 1
HH
Fixing
Bracket
x 4
9
ASSEMBLY INSTRUCTIONS
7
7. Carefully install the glass tube by lifting up
and inserting through the center hole in the
upper plate. Ensure the black silicone ring is
attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the
hole of the lower plate cover and onto the
middle plate. Check and ensure that the glass
tube is positioned properly and is completely
covering the center hole of the middle plate.
8. Assembly the protective guard.
Hang the hooks of the protective guard onto
the holes in supports.
Secure the protective guards with fixing
brackets with 4pcs 3/16" screws.
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
WARNING! The black
silicone ring must be in place
prior to operating the heater.
BLACK SILICONE
RING
Hardware Used
8
E
DD
HH
DD
KK
x 4
Philips
screwdriver
3/16” Screw
x 1
HH
Fixing
Bracket
x 4
Figure 8
10
ASSEMBLY INSTRUCTIONS
9
10
9. Attach the three side panels to the heater
using 18pcs screw 3/16”.
Note : Do not cover the front side where
the control knob is.
LL
MM
H
NN
DD
Hardware Used
DD
KK
x 18
Philips
screwdriver
3/16” Screw
x 1
10
.
Install the knob to M4x10 screw. Hang the
chain to the hole on the control box assy and
put the pothook of front panel to the holes of
bottom plate.
Hardware Used
x 1
LL
Knob
MM
KK
x 1
x 1
Philips
screwdriver
Screw M4 X 10
x 1
NN
Chain
10
ASSEMBLY INSTRUCTIONS
9
10
9. Attach the three side panels to the heater
using 18pcs screw 3/16”.
Note : Do not cover the front side where
the control knob is.
LL
MM
H
NN
DD
Hardware Used
DD
KK
x 18
Philips
screwdriver
3/16” Screw
x 1
10
.
Install the knob to M4x10 screw. Hang the
chain to the hole on the control box assy and
put the pothook of front panel to the holes of
bottom plate.
Hardware Used
x 1
LL
Knob
MM
KK
x 1
x 1
Philips
screwdriver
Screw M4 X 10
x 1
NN
Chain
Figure 9
