GARDENPRO SHEDS - STORAGE GUIDELINES
GARDENPRO SHEDS include garden sheds, garden beds, storage units, aviaries, garages, awnings
and carports.
GARDENPRO SHEDS are designed to be weatherproof for normal weather conditions. In the event
of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge
capping, sheeting joins, screw fixings etc., may exhibit minor deformations which may allow some
water entry. These areas should be checked regularly to ensure that maximum strength and
protection is maintained.
Other weather conditions such as extreme heat and extreme cold, moist or dry air can influence
the effects of concrete floor moisture and/or condensation on the underside of the roof sheets.
GARDENPRO SHEDS and storage units are primarily used for storage of garden equipment such as
lawnmowers, wheelbarrows, garden tools etc. Storage items that might be adversely affected by
any of the above conditions may require additional protection such as being sealed or covered by
plastic sheets and/or stacked above the concrete floor on timber slats.
Waterproof sealants may be used to offer further protection where required around joins and screw
fixings, as can rubber door seals and other products which are available from most hardware
outlets.
Placement of waterproof sealants (silicone) between the base of the shed and concrete slab is not
recommended, as this process can have a reverse effect, preventing excess water from escaping,
resulting with water accumulating and being trapped inside the shed.
GARDENPRO accepts no responsibility for water entry, floor moisture, condensation or the condition
of the Contents inside your GARDENPRO steel building arising from any of the pre-mentioned
weather conditions.
GARDENPRO
ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: J23231TK 05-10-2017
Gardenpro Tidymaster Series
Shed Model: J23231TK
PAGE 22
