66
WARNING!
Always replace the damaged or bent
blade; never try to repair it! ALWAYS USE
MANUFACTURER’S GENUINE REPLACEMENT
BLADES BEARING THE SYMBOL “KCR26B-2-09”!
WARNING!
When re-fitting the blade, always follow
the indicated sequence, making sure that the blade’s
wings are facing towards the interior of the cutting
deck and that the concave part of the cup spring (1) is
pressing against the blade.
Tighten the fixing screw (2) using a torque wrench set
to 40-45 Nm. If the shaft hub (3) came off when
dismantling the blade, make sure that the key (4) is
firmly in its right position.
The blade should be stop within 3s after the operator
disengages the blade control lever or leaves seat or
open the grass catcher. If the blade does not stop
quickly, please do not use the lawnmower and send it
to authorized after-sales center for repair.
5.4 REPLACING THE BELT
The belt replacement must be carried out at a Licensed Service Center.
NOTE
Replace the belt as soon as they show obvious signs of wear! ALWAYS USE GENUINE
REPLACEMENT BELTS!
INSTRUCTION MANUAL
Summary of Contents for KCR26RC-BS
