GardenMaster GM45CS3, Safety And Operating Manual

Page: 27 / 32

27
Make sure every cutter has the same length
and edge angles as illustrated.
Cutter length (4).
Side plate angle (5).
Top plate cutting angle (6)
STORAGE THE CHAIN SAW
WARNING: Perform the following steps
after each use:
• Allow the engine to cool, and secure the unit
before storing or transporting.
• Store chain saw and fuel in a well ventilated
area where fuel vapors cannot reach sparks
or open flames from water heaters, electric
motors or switches, furnaces, etc.
• Store chain saw with all guards in place and
position chain saw so that any sharp object
cannot accidentally cause injury.
• Store chain saw well out of the reach of
children.
SEASONAL STORAGE
Prepare your unit for storage at the end of the
season or if it will not be used for 30 days or
more.
If your chain saw is to be stored for a period of
time:
• Clean saw thoroughly before storage.
• Store in a clean dry area.
• Lightly oil external metal surfaces and guide
bar.
• Oil the chain and wrap it in heavy paper or
cloth.
TRANSPORTING THE
CHAIN SAW
WARNING!
Always stop the engine before putting
a chain saw down or carrying it. Carrying a
chain saw with the engine running is extremely
dangerous. Accidental acceleration of the
engine can cause the chain to rotate. Avoid
touching the hot muffler.
By hand: When carrying your saw by hand,
the engine must be stopped and the saw must
be in the proper position. The chain protection
cover should be over the chain and the guide
bar must point backwards. When carrying your
saw the bar should be behind you.
By vehicle: When transporting in a vehicle,
keep chain and bar covered with the chain
guard. Properly secure your saw to prevent
turnover, fuel spillage and damage to the saw.
Make sure the saw in not exposed to heat or
sparks.