After Sales Support TEL: 1300 130 579 WEB: www.rossmac.com
12
5. FAQ
6. Useful Information
Technical data
Fault Possible causes Troubleshooting
The motor does
not start
Material is not
drawn in by
the shredder
The material is
not shredded
properly
Power failure
Safety swith on the debris box
not locked in position
The shredding blade is running
in reverse.
Material blockage in the filling
funnel
The shredding blade is jammed
The counter blade is not set
correctly
Check the mains lead, plug
and fuse.
Ensure debris box is in
position and locked.
Change the direction
of rotation.
Change the direction of
rotation and pull the material
out of the funnel. Feed in thick
branches again so that the
blade does not immediately
engage again in the notches
it previously cut.
Change the direction of
rotation.The blade will now
release the jammed material.
Adjust the counter blade. See
page 20 on how to do so.
Voltage: 240 V ~ 50 Hz
Power rating: 2400 W (S6-40%) 2000 W (S1)
Cutting unit idling speed: 40 min-1
Branch diameter: max. 40 mm
L
pA
sound pressure level: 88 dB (A)
L
WA
sound power level: 106 dB (A)
Weight: 28 kg
S6 (40%) stands for a duty cycle based on 4 minutes on-load
and 6 minutes off-load operation. Maximum power consumption
depends on the consistency of the material being shredded.
