Step 1: Assemble the legs
1
40
27
6
9
27
1. First take the table support
6
and place it, upside down, on a clean and
smooth surface.
2. Attach the hook strip
9
on the front-side with two screws
27
(M6x12).
(Screwdriver
40
).
37
3
2
40
5
37
3. Attach the leg modul
3
to the bottom of the table (front/right), in the rectangle
provisions. Make sure that the thread inserts are on the inside. Fix it, only loosely,
with two screws
37
(M6x15). (Screwdriver
40
).
4. Repeat step 3 with leg modul
5
(front/left).
5. Attach part
2
with the free edge over the front leg right. Fix it with one screw
28
(M6x12 black), a washer
29
(Ø16) and a nut
34
(M6), using a screwdriver
40
and wrench
42
. (See Figure 3).
6. Repeat step 5 with part
4
for the back/right position.
7. Tighten the screws you positioned in step 3 and 4.
Legs are assembled.
Assembly instruction
11
