WARNING!
Danger of electric shock, short circuit and material damage
Power lines, water and gas pipes or other lines/pipes in the wall
may become damaged during the installation and lead to
hazards or damage to the environment.
- Make sure that you do not damage hidden pipes/lines during
the installation. Use suitable line/pipe detectors for this
purpose.
CAUTION!
Risk of injury!
If you do not precisely follow these assembly instructions,
mistakes may happen and lead to injuries.
- Only use the stated tools for the installation.
- Wear protective goggles when working with power tools and
always follow the manufacturer's instructions.
- If you are not certain, have an experienced expert install the
product.
Mounting wallmounted bracket
The supplied plastic plugs are suitable for cement walls (plaster up to
1cm). For other wall types, special plugs must be used.
1. Mark 4 holes position on the wall using the wall
mount bracket
5
, drill holes into the wall
50mm depth with an Ø10mm percussion drill.
100 - 110 cm height of lower holes is
recommended.
3,3cm
12,1cm
100-110cm
1
Before first use
11
Summary of Contents for GRHS20A
Page 2: ...Overview 2 1 2 3 5 6 7 8 9 10 11 12 13 14 15 4...
Page 4: ......
