Gardenline
17
Removing a unit from storage
•
Remove spark plug.
•
Pull starter rope briskly to clear excess oil from combustion chamber.
•
Clean and gap spark plug or install a new spark plug with proper gap.
•
Prepare unit for operation.
•
Fill fuel tank with proper fuel / oil mixture. See Fuel and Lubrication Section.
Troubleshooting
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the
warranty card. In the back of this manual you find an exploded view showing the parts that can
be ordered.
Problem
Unit won’t start or starts but
will not run
Unit starts, but engine has
low power
Engine hesitates
No power under load
Runs erratically
Smokes excessively
Cause
• Incorrect starting
procedures.
• Incorrect carburetor
mixture adjustment
setting.
• Fouled spark plug
• Fuel filter blocked.
• Incorrect lever position on
choke.
• Dirty air filter.
• Incorrect carburetor
mixture adjustment
setting.
• Incorrect carburetor
mixture adjustment
setting.
• Incorrectly gapped spark
plug.
• Incorrect carburetor
mixture adjustment
setting.
• Incorrect fuel mixture.
Solution
• Follow instructions in the
User Manual.
• Have carburetor adjusted
by an Authorized Service
Center.
• Clean / gap or replace plug.
• Replace fuel filter.
• Move to RUN position.
• Remove, clean and
reinstall filter.
• Have carburetor adjusted
by an Authorized Service
Center.
• Have carburetor adjusted
by an Authorized Service
Center.
• Clean / gap or replace plug.
• Have carburetor adjusted
by an Authorized Service
Center.
• Use properly mixed fuel
(40:1 mixture).
UK
08
Gardenline
Petrol grass trimmer GPLT-26cc
THE NUMBERS IN THE FOLLOWING TEXT CORRESPOND WITH THE PICTURES AT
PAGE 2-7
Read this operators guide carefully, before using the machine. Ensure that you know
how the machine works, and how it should be operated. Maintain the machine in
accordance with the instructions, and make certain that the machine functions
correctly. Keep this operator’s guide and other enclosed documentation with the
machine.
Contents:
1. Machine
data
2. Safety
instructions
3. Assembly
4. Use
5.
Service & maintenance
Specifications
General identification
1.
Line head
2.
Trimming line
3.
Debris shield
4.
Drive shaft assembly
5.
“P” handle
Engine Type
| Air-cooled, 2-cycle, chrome cylinder
Displacement
| 26 cm
3
Dry Weight
| 5.0 Kg
Fuel Capacity
| 520 cm
3
Bump Head
| Twin line bump feed
Drive Shaft Length
| 132 cm
Cutting Width
| 43 cm
Handle
| P Handle
Drive
| Centrifugal clutch
Shaft Type
| Curved
Sound pressure level
| 96.5 dB(A)
Sound power level
| 110 dB(A)
Vibration level for racing
| 5.75 m/s
2
Vibration level for idling
| 2.0 m/s
2
.
Maximum Engine Performance
| 1.0 kW
Maximum Rotational Frequency of the Spindle
| 8500 min
-1
Idle Speed
| 3200 ± 200 min
-1
Fuel consumption
| 620 g/kWh
1. TECHNICAL SPECIFICATIONS
UK