Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 7781
07
hose cables H07RN-F as described in DIN 57 282/VDE 0282
and must have a minimum cross-section of 1.5 mm
2
.
The plug connectors must have safety contacts and the
connection must be splashproof. The mains lead must be
threaded through the strain-relief clamp on the strut and
connected to the switch/plug combination. Before use
check the lead for signs of damage and ageing. Never use
the mower if the cables are not in perfect condition (this
also applies to the motor supply cable on the mower). If
the cable is damaged whilst the mower is working,
disconnect the mains plug from the power supply
immediately and then check the extent of the damage.
27 When you start the motor the lawn mower must not be
tilted unless it has to be raised for this purpose. In this
case only tilt it up as far as is really necessary and only
raise the side that is furthest away from the user.
28 Disconnect the plug from the power supply if the mower
starts to suffer unusual vibrations (check the mower
immediately).
29 Ensure that all the nuts, bolts and screws are tight and that
the mower is in a safe condition for use.
30 Switch off the motor and disconnect the plug from the
power supply if the mower strikes a foreign body. Check
the mower for signs of damage and carry out the
necessary repair work before you start work with the
mower again.
31
Do not leave the mower out in the rain. The lawn must not
be wet or very damp.
32 Ensure that you have safe footing at all times whilst
working with the mower.
33 Only push the mower at walking pace.
34 Be particularly careful when changing direction with the
mower whilst working on a slope.
35 Be particularly careful when you change the direction of
the mower or pull it towards you.
GLM1501 User Guide AW.qxd 16/12/08 1:42 pm Page 8
