19
Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualified
electrician. Important! The carbon brushes should not be replaced by anyone but
a qualified electrician.
Maintenance
There are no parts inside the equipment which require additional maintenance.
Re-ordering replacement parts
Please quote the following data when ordering replacement parts:
-
Type of machine (GLM1437)
-
Article number of the machine (34.002.87)
-
Identification number of the machine (11012)
-
Replacement part number of the part required
For our latest prices and information please go to www.einhell.co.uk
IMPORTANT!
Wear work gloves!
Only replace the blade with a genuine replacement blade, as this will ensure
top performance and safety under all conditions.
Carry out the following steps to change the blade:
- Undo the fastening screw (Fig. 7).
- Remove the blade and replace with a new one.
- When fitting the blade, make sure it is installed in the right direction.
The blade’s air vanes must jut into the motor compartment.
- Then retighten the fastening screw. The tightening torque should be
approx. 25 Nm.
Useful Information
6
GB
Ire
MODEL: GLM1437
After SAleS Support
0151 649 1500
1890 946 244
www.einhell.co.uk
