24
Maintenance and Care
8
WARNING! Always switch the product off, disconnect it
from the power supply and let the product cool down
before performing inspection, maintenance and cleaning
work!
1. Keep the product clean. Remove debris from it after each use
and before storage.
2. Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
3. Inspect the product before each use for worn and damaged
parts. Do not operate it if you find broken and worn parts.
WARNING! Only perform repairs and maintenance work
according to these instructions! All further works must be
performed by a qualified specialist!
General cleaning
1. Clean the product with a damp cloth and pH-neutral soap. Use
a brush for areas that are hard to reach.
2. In particular clean the air vents (5) after every use with a cloth
and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
4. Check for any damage and wear. Repair damages in
accordance with this instruction manual or take it to an
authorised service centre before using the product again.
k
www.coreservice.co.u
AFTER SALES SUPPORT
IRE
GB
01904 727501
019022605
MODEL: GLHT600, 08/2015, 65531
Summary of Contents for GLHT600
Page 32: ...GLHT600 08 15...