UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: GLGS-1200
8
d. Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalign ment or binding of
moving parts, breakage of parts and any other condition that
may affect the po wer tools operation. If dama ged, have the
po wer tool repaired before use. Many acci dents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner intended
for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the
power tool for operations different from intended could result
in hazardous situation.
h. Damaged switches must be replaced at a cus to mer service
repair centre. Do not use power tools that cannot be switched
on and off.
i. Do not leave power tools unattended while they are switched
on. Always switch off the tool and wait until it has come to a
full standstill before leaving.
j. If the mains cable has been damaged, it must be replaced with
a special mains cable. These can be obtained from the
manufacturer or the manufacturer’s custo mer service
department. The mains cable may only be replaced by the
manufacturer, the manufacturer’s customer service
department or equally qualified persons.
5) Service
a. Please use a qualified expert who uses original replacement
parts to repair your power tool. This will ensure proper
functioning of the power tool.
b. Caution! The use of any accessories or additional tools other
than those recommended in this manual may lead to an
increased risk of injury. Only use original replacement parts.
