
AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: GL-CH 36 Li, 02/14
10
Technical Data
5
Battery Voltage
36V DC
Capacity
2.6 Ah
Charger output voltage
42V DC
Charger current voltage
2 A
No load speed
3000rpm
Cutting capacity
20 mm
Blade length
55 cm
Weight
4.7 kg
Charging time
100 min
Sound and Vibration
Sound pressure level LpA
83 dB(A)
Uncertainty KpA
3 dB
Sound power level LWA
94 dB(A)
Uncertainty KWA
3 dB
Wear ear-protectors.
The impact of noise can cause damage to hearing.
Functions
Vibration emission value ah =1.946 m/s
2
K uncertainty = 1.5 m/s
2
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condition.
•
Maintain and clean the equipment regularly.
•
Adopt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
Before starting the equipment
6
6.1 Battery (Fig. 2a/ Item 7)
The equipment is fitted with a lithium-ion
battery. The battery pack is completely closed and
maintenance free.
6.1.1 Battery charge level indicator (Fig. 2a)
The battery pack is equipped with a pushbutton
for checking the charge level. Simply press the
pushbutton (Figure 2a/Item 9) to read off the battery
level from the LEDs of the battery indicator (Fig. 2a/
Item 10):
•
All 3 level monitoring LEDs are lit:
Battery charge level is high.
•
2 level monitoring LEDs are lit: Battery charge
level is decreasing. Stop work as soon as
possible.
•
1 level monitoring LED is lit: Battery is flat. Stop
work IMMEDIATELY and charge the battery.
Otherwise the battery’s service life will be
greatly shortened.
6.1.2 Charging the battery
•
Pull the pushlock button (Fig. 2a/ Item c) and
pull the battery pack (7) up and out of the
equipment.
•
Check that your mains voltage is the same as
that marked on the rating plate of the battery
charger. Insert the power plug of the charger
into the mains socket outlet. The LED A (Fig. 2b)
will then illuminate in green.
•
Push the battery onto the charger as shown in
Fig. 2a. The LED B will illuminate in red while
LED A is still green (Fig. 2b).
•
The battery is fully charged when LED A and B
(Fig. 2b) are illuminated in green.
•
Pull the pushlock button (Fig. 2a/ Item c) and
pull the battery pack (7) out of the charger.
If the rechargeable battery pack fails to charge, check
whether there is voltage at the socket outlet.
If you still fail to charge the battery pack, please call
our customer service centre on 1300 922 271.
Timely recharging of the battery will help it serve
you well for a long time. You must recharge the
battery pack when you notice that the power of the
equipment drops.
Never allow the battery pack to become fully
discharged. This will cause it to develop a defect.
Operations
7
7.1 Starting the Hedge Trimmer
The hedge trimmer is equipped with a two-
handed safety switch. The machine works only
when the On/Off switch on the steady grip
(Figure 1 / Item 6) is pressed with one hand
and the safety switch on the additional handle