Warranty
The guarantee conditions can be found on the separately enclosed guarantee
card.
CE
DECLARATION OF CONFORMITY (GB)
We declare under our sole responsibility that this product is in conformity
with the following standards or standardized documents:
GCS-2000 Chain Saw
EN 50144-1, EN 50144-2-13, EN55014-1, EN55014-2,
EN 61000-3-2, EN 61000-3-11
In accordance with the regulations:
98/37/EC, 2000/14/EC, 2006/95/EC, 2004/108/EC,
2002/95/EC, 2002/96/EC
from 01-09-2005
ZWOLLE NL
J.A. Bakker - van Ingen
J. Lodewijk
CEO Ferm BV
Quality Manager Ferm Global
It is our policy to continuously improve our products and we therefore reserve
the right to change the product specification without prior notice.
Servotool BV. Lingenstraat 6. 8028 PM Zwolle. The Netherlands
Warranty
7
Meaning of symbols marked on the product
The following pictograms are used in these instructions for use:
Read the user manual before using the machine
In accordance with essential applicable safety standards of
European directives
Class II machine – Double insulation – You don’t need any earthed
plug.
Whenever the machine is in use, safety goggles must be worn to
safeguard against flaying object, as must ear protectors, such as a
soundproof helmet, in order to protect the operator’s hearing. If
the operator is working in an area where there is a risk of falling
objects, a safety helmet must also be worn.
Wear gloves to protect your hands
Warning! Danger
Do not expose to rain
Remove plug from the mains immediately if cable is damaged or
cut
Wear safety boots to protect against electric shock
Sound power level 105 dB (A)
Faulty and/or discarded electrical or electronic apparatus have to
be collected at the appropriate recycling locations.
Safety Instructions
3
HELPLINE No. UK 0905-1460005
(£ 0,06/min)
• IRELAND 1520-932626
(
E
0,15/min)
WEB SUPPORT: www.heltec.eu
Model Number: GCS-2000
07
HELPLINE No. UK 0905-1460005
(£ 0,06/min)
• IRELAND 1520-932626
(
E
0,15/min)
WEB SUPPORT: www.heltec.eu
Model Number: GCS-2000
38
