HTW250/240P
Introduction
AFTER SALES SUPPORT
9
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
XIV. TROUBLESHOOTING
The table below contains a list of fault symptoms and explains what you can do to
remedy the problem if your equipment fails to work properly. If the problem still
persists after working through the list, please contact your nearest service
workshop.
m
IMPORTANT!
Hint in case of sending the equipment to a service centre:
Due to safety reasons please see to it that the equipment is sent back free of oil and
petrol!
Fault
Possible cause
Remedy
Hedge trimmer does
not work.
• No fuel supply
• Fault in the fuel line
• Fuel filter clogged
• Spark plug defective
• Carburettor
defective
• Internal fault
• Check the fuel quantity
• Check the fuel line for kinks or
damages
• Clean/replace the fuel filter
• Replace the spark plug
• Manufacturer or responsible cus-
tomer service must be called
• Manufacturer or responsible cus-
tomer service must be called
Hedge trimmer cuts
with interruptions
• Internal fault.
• ON/OFF switch
defective
• Manufacturer or responsible cus-
tomer service must be called
• Manufacturer or responsible cus-
tomer service must be called
Engine is running,
cutting device does
not move
• Cutting device
blocked
• Internal fault
• Clutch defective
• Remove object
• Manufacturer or responsible cus-
tomer service must be called
• Manufacturer or responsible cus-
tomer service must be called
Cutting device gets
hot
• Missing lubrication
=> friction
• Not enough play
• Cutting blades are
blunt
• Oil the cutting device
• Adjust the sliding play
• Have the cutting device
sharpened
AUS
HTH250/240P
Troubleshooting
AFTER SALES SUPPORT
31
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
