11
How to charge the battery pack
？
Name of Accessories
Use of Accessories
HSS Twist Drill Bits
(3mm 4mm 5mm 6mm 8mm)
For drilling wood, ordinary steel, aluminum, plastic and
other materials.
NOTE: The drill bit is made of ordinary carbon steel and is
not suitable for drilling hardened metal materials after heat
treatment.
Wood Drill Bits
(5mm 6mm 8mm)
For drilling wood, plastic.
25mm Screwdriver Bits
For unscrewing or screwing in screws.
Sockets
(5mm - 13mm)
For unscrewing or screwing in hex nut.
Socket Adapter
Extension Rod
Used to connect sockets and screwdriver Bits.
Flexible Shaft
Suitable for narrow working spaces.
OPERATION
CAUTION:
Fully charge battery before first use. The battery will reach
full capacity after being charged and discharged several times.
CAUTION:
Avoid short periods of charging. Only charge the battery pack
when completely empty.
CAUTION:
Adaptor, charger and battery pack will be warm when charging.
1. Insert the AC/DC adapter into the household current receptacle.
The green light is on. The green light is the power indicator.
2. Properly insert the charger into the battery. The red light is on. The
red light is the charge indicator.
3. Normal charging time is 1-2 hours. When the battery is fully
charged, the red light will turn off, and the green light is on.
4. When charging more than one battery pack in succession, allow 15
minutes between charges.
