40
•
Insert the vacuum attachment protection screw (15) into the opening and
tighten by rotating it clockwise. Attach the leaf bag installation clamp (10) on
the vacuum attachment hook.
•
Attach the leaf bag installation clamp (10) on the vacuum attachment hook.
•
Connect the bag connector (13) with the blower air outlet (3). Make sure the
bag is fixed correctly.
•
The device is ready for use.
Caution! The device will not start if the vacuum attachment protection
screw (15) is not tightened.
If the device does not start, check whether the vacuum attachments (9)
and the bag connector (13) are correctly installed on the device.
7.3 Strap installation
Set provided with device include strap (7), allowing to hang device on shoulder,
increasing mobility and work comfort.
Strap (7) installation is done by fastening the carabiner in the hole located in
the housing.