Phone Orders: 1-800-427-3363 • Customer Service: 1-800-876-5520
e-mail: [email protected] • Web: www.gardeners.com
Important:
If you have
also purchased the
Rose Trellis and
Connector Set,
repeat Steps 1-3
to assemble your
other Trellis on
the ground and
then follow the
instructions that
come with the Rose
Trellis Connector
before proceeding.
Step 4.
Lift your Trellis so it is upright.
Make sure it is straight, then push
the staked ends into the ground all
the way to the bottom of the lattice
section.
Step 5.
Examine both ends of a
Support Brace to find the one
that is curved, then line it up with
the holes in the side of the Trellis
(Figure 3). Insert the Long Bolts
through each set of holes and attach the Nuts onto the ends. Repeat to attach
the other Brace onto the other side of the Trellis.
Step 6.
Make sure your Trellis is perfectly vertical using a level, then place the
Stakes through the holes in the bottom of the Support Braces and hammer
them into the ground (Figure 3). Your assembly is complete!
For extra stability, place Earth Staples (sold separately) over the bottom of the
Trellis. The powder-coated steel is weather-resistant and can be left outdoors
year-round. However, if the finish is nicked or scratched, use an exterior-grade
metal paint to prevent rust.
For more plant supports and garden decorations,
please visit us at gardeners.com.
Side Panels
Figure 2
Support Brace
Long
Bolts
and
Nuts
Figure 3
